Central Ohio sits on an ENERGY STAR line
ENERGY STAR divides the country into climate zones and sets separate window criteria for each, and the boundary runs right through Central Ohio. ENERGY STAR assigns zones by county, so a window that qualifies for a house in Franklin County may not qualify for a house a short drive north or east.
| ENERGY STAR zone | Counties around Columbus |
|---|---|
| North-Central | Franklin, Madison, Pickaway, Fayette, Ross, Hocking |
| Northern | Delaware, Union, Licking, Fairfield, Knox, Marion, Champaign, Clark, Muskingum, Perry |
Where a city straddles a county line, the county of the house is what counts. Columbus itself reaches into Delaware and Fairfield counties, so not every Columbus address falls in the North-Central zone. The climate zone finder on energystar.gov confirms the zone for a specific location.
What the current criteria ask for
ENERGY STAR Version 7.0 for residential windows took effect on October 23, 2023. For windows it sets:
- North-Central: a U-factor of 0.25 or lower and a solar heat gain coefficient (SHGC) of 0.40 or lower.
- Northern: a U-factor of 0.22 or lower with an SHGC of at least 0.17. An equivalent-performance path also accepts a U-factor of 0.23 or 0.24 with an SHGC of at least 0.35, or 0.25 or 0.26 with an SHGC of at least 0.40, trading a little insulation for more winter sun.
The Northern criteria set a minimum SHGC rather than a maximum, and the equivalent path rewards a higher one, because in a heating-dominated climate some winter sun through the glass offsets heat loss. When you compare windows for a home in a Northern county, check that the product is certified for that zone, not just for North-Central.
A note on tax credits: the federal Energy Efficient Home Improvement Credit no longer applies to windows placed in service after December 31, 2025, according to the IRS. Ask a tax professional about your situation.
How to read the NFRC label
The National Fenestration Rating Council label on a window reports tested numbers for the whole unit, frame included:
- U-factor: the rate of heat loss. Lower is better.
- Solar heat gain coefficient: the share of the sun’s heat that comes through, from 0 to 1. Lower keeps summer heat out; higher lets winter sun help.
- Visible transmittance: how much daylight gets through, from 0 to 1. Higher is brighter.
- Air leakage (optional on the label): how much air passes through the unit. Lower is better, and ENERGY STAR requires it to be no more than 0.3 cubic feet per minute per square foot.
- Condensation resistance (optional): a score from 1 to 100. Higher means less likely to fog or frost on the room side.
Asking for these numbers for the exact unit in each quote is the most reliable way to compare windows from different companies.
What goes into an efficient window
Low-E coatings
Low-emissivity coatings are microscopically thin, nearly invisible metal or metal-oxide layers on the glass that reflect heat. Different coatings tune the balance between keeping heat in, keeping sun out and letting light through, which is why two Low-E windows can carry very different SHGC numbers.
Gas fills
The space between panes is often filled with argon, an inert, colorless gas that slows heat transfer better than air.
Double or triple pane
Double-pane Low-E glass with argon is the common starting point. Triple-pane adds a third layer of glass and a second gas space, lowering the U-factor further at the cost of weight. Some double-pane products reach the Northern zone’s level and some do not, so compare the label rather than counting panes.
Spacers and frames
Warm-edge spacers between the panes reduce heat flow at the edge of the glass. Vinyl, fiberglass, wood and clad-wood frames all insulate far better than plain aluminum.
Installation counts as much as the glass
A well-rated window installed with gaps around the frame will still feel drafty. The space between the frame and the rough opening should be insulated with a low-expansion foam or similar material, air-sealed, and flashed to keep water out. That is easier to do and to check in a full-frame installation. See our window replacement page for how insert and full-frame installs differ.
Before you replace for efficiency
If the frames are sound and the problem is fog between the panes, replacing only the sealed glass unit can restore the glass at much lower cost; see foggy window repair. When you get in touch, mention your county so the right ENERGY STAR criteria are on the table from the start. A technician looks at the windows before anything is quoted, and you see the price before work starts. Call or text (614) 333-6302, or book online.