Repair first, replace when the window is done
A window that sticks, rattles or fogs is not automatically a window that needs replacing. A broken balance, a worn crank or a single failed glass unit can often be fixed for a fraction of what a new window costs, and our window repair page covers those jobs. Replacement earns its place when the problem is the window itself rather than one part of it.
- The frame or sill is soft, cracked or rotted through, not just peeling.
- Several sashes in the house have fogged glass, failed balances or broken hardware at once.
- The window was never sealed well, and you can feel air moving around it on a windy day.
- The style no longer suits the room: a slider where you want a full-width view, a fixed pane where you need ventilation, or a basement bedroom that needs a code-compliant escape opening.
Two ways a new window goes in
Insert (pocket) replacement
The old sashes, stops and balance hardware come out, and a complete new window is set inside the existing frame. Interior trim and exterior siding usually stay put, so the job is quicker and tidier. It only works when the existing frame is square, dry and solid, and the new unit is slightly smaller than the opening it replaces, so you give up a little glass.
Full-frame replacement
Everything comes out down to the rough opening: frame, sill, interior trim and sometimes the exterior trim. That lets the installer inspect the framing, repair rot, flash the opening properly and air-seal the gap between the new frame and the house. It is the right call when the frame is damaged, when the opening size changes, or when water has been getting in around the old window.
Choosing the style
Most rooms can take more than one style, and the choice changes how the window opens, seals and cleans:
- Double-hung windows suit traditional brick and frame houses and open from the top or bottom.
- Casement windows crank open fully and close against their weatherstripping.
- Sliding windows fit wide, short openings in ranches and lower levels.
- Picture windows trade ventilation for the largest clear view.
- Bay and bow windows project out from the wall and add a seat or shelf.
- Egress windows give basement and other sleeping rooms the escape opening the Ohio code requires.
Frame materials in plain terms
Vinyl does not need paint and insulates well, though dark colors and very large sizes need a well-reinforced frame. Fiberglass is stiff and stable through Ohio’s freeze-and-thaw swings and takes paint. Wood looks right in older homes and insulates well but needs paint or stain to stay sound; clad wood puts an aluminum or fiberglass skin on the outside so the exposed face needs less upkeep. Plain aluminum frames conduct heat readily and are rarely the right choice for a heated home here unless they include a thermal break.
Read the label, not the brochure
An NFRC-rated window carries a label with its U-factor, solar heat gain coefficient and visible transmittance, and often its air leakage. Those numbers are tested for the whole window, so they let you compare one quote with another directly. Central Ohio also straddles two ENERGY STAR climate zones, which matters when you check whether a window qualifies; our energy-efficient windows page explains which counties fall where.
Older homes have extra rules
In most homes built before 1978, the EPA treats window replacement as a renovation covered by its lead Renovation, Repair and Painting rule, no matter how small the window is. A firm paid to do that work must hold EPA RRP firm certification and follow the rule’s work practices, so ask to see it before work starts. In Columbus historic districts such as German Village and Victorian Village, exterior window changes go through the city’s historic preservation review and need a Certificate of Appropriateness. The city’s preservation staff favor repairing original windows and keep an approved list of replacement windows for the cases where repair is no longer feasible. Our wood window repair page covers the repair side.
What to ask any window contractor
- Is this an insert or a full-frame installation, and why for this opening?
- What are the U-factor, SHGC and air-leakage numbers on the NFRC label of the exact unit quoted?
- How will the gap between the new frame and the house be insulated, sealed and flashed?
- Who measures, and what happens if a window arrives the wrong size?
- For a pre-1978 home, can I see the firm’s EPA RRP certification?
- What written coverage comes with the product, and what comes with the installation?
How A1 Windows handles a replacement
A1 Windows works from 1221 Stimmel Rd in Columbus. A technician looks at the windows and the openings before anything is quoted, and you see the price before work starts. Call or text (614) 333-6302, or book online, and tell us which windows are giving you trouble.