Rescreen, repair or replace?
A window screen is a frame, a mesh and a spline: the rubbery cord pressed into a groove that holds the mesh tight. Most screen problems come down to one of those three, plus the small clips, tabs or spring plungers that hold the screen in the window. Which part has failed decides the fix.
- Torn, sagging or brittle mesh, frame still straight: rescreen the existing frame with new mesh and spline.
- Mesh pulled out along one edge: often just a spline that has shrunk or popped out, which can be reset or replaced.
- Bent frame or broken corners: the frame is rebuilt or replaced, then screened.
- Missing screen: a new one is made to the window’s measurements, with clips or plungers to match.
Choosing mesh
Several common types are available:
- Fiberglass: flexible, doesn’t dent or corrode, and the most common choice for windows.
- Aluminum: stiffer and more durable against abrasion, but it can dent and crease.
- Pet-resistant: a heavier, tougher mesh for windows where pets claw or push against the screen.
- Solar screening: a denser mesh that blocks part of the sun’s heat and glare on hot exposures, at the cost of some view and light.
Humid Columbus summers are when most windows get opened, so a tight, well-fitted screen matters more than people expect. A screen that doesn’t seat fully in its track leaves gaps around the edges.
How a screen is measured and fitted
- Measure the opening the screen fits into, not the glass, and note which side the pull tabs or plungers are on.
- Check the window’s screen track or channel for damage; a bent track makes any screen fit badly.
- Build or rescreen to those dimensions, keeping the mesh tight without bowing the frame.
- Fit the screen and check that it seats on all sides and comes out easily from inside.
Casement and awning windows usually take their screens on the inside; double-hung and sliding windows usually take them on the outside. Some screens are specific to a window maker. If a screen problem comes with a crank or lock problem, see lock and crank repair.
A screen is not a safety barrier
The U.S. Consumer Product Safety Commission says never to depend on screens to keep children from falling out of windows. A screen is made to keep insects out and can give way under a child’s weight. CPSC’s guidance is to keep furniture away from windows so children can’t climb to them, and to install window stops so windows open no more than four inches, or window guards that adults and older children can open easily in a fire. On a bedroom’s escape window, the Residential Code of Ohio allows opening control devices that meet ASTM F2090.
Don’t block a bedroom or basement escape window with a screen or guard that can’t be removed quickly from inside. See egress windows.
Looking after screens
- Remove screens before washing them, and rinse gently; a pressure washer can tear mesh and pop the spline.
- Store screens flat or on edge in a dry place, not leaning under weight.
- Count screens by window and note any missing or damaged before calling; it makes the visit quicker.
Screens are often handled alongside other window repair on the same visit. Call or text (614) 333-6302 or book online.