Why a window won’t stay open
In a double-hung or single-hung window, the sash doesn’t hold itself up. A counterbalance hidden in the side of the frame carries its weight. When a window slams shut, creeps down, rides up, sits crooked or takes two hands to lift, that counterbalance is usually what has failed.
The balance systems you may have
Cords, pulleys and weights
Older wood windows hang each sash on a cord or chain that runs over a pulley at the top of the frame to an iron weight in a hidden pocket. When a cord breaks, the sash drops and won’t stay up. The fix is new rope cord or chain, threaded to the weight through an access door on the face of the frame near the sill (or behind the trim where there is no door), and the original weights and pulleys can usually be reused. A painted-over pulley that won’t turn can be freed at the same time.
Spiral (tube) balances
A rod with a spiral twist runs inside a tube on each side of the sash. Tension is set by winding the rod, so a spiral balance stores spring energy. When the window gets heavy to lift or drifts down, the balance has lost tension or the rod has come unhooked from the shoe at the bottom of the sash.
Block-and-tackle (channel) balances
A spring and a cord run over small pulleys inside a channel in the jamb, common in vinyl tilt-in windows. Cords fray and springs fatigue, and the balance is replaced as a unit, sized to the sash’s weight and height.
Constant-force coil balances
A flat, coiled steel spring mounted near the top of the jamb unrolls as the sash goes down and pulls with steady force. A coil that has weakened or come loose from its shoe lets the sash drop.
Shoes and pivot bars
On tilt-in windows, pins on the sash called pivot bars sit in shoes that ride in the jamb track. A cracked shoe, or one that has unlocked and slid to the bottom of the track, makes the sash sit crooked or fall out of the track when tilted.
How the repair is done
- Identify the balance type and check both sides; one worn balance often means its partner is close behind.
- Tilt or remove the sash, with the balances secured so they can’t release.
- Replace the cord, balance, coil or shoes with parts matched to the sash’s size and weight.
- Reset the sash, then test that it lifts with light pressure and stays where it is left.
While the sash is out, it is a good time to check the weatherstripping, the sash lock and the glass; see lock and crank repair and foggy window repair.
Safety notes
Spiral balances and coil balances are spring-loaded. A balance that slips while being unhooked can snap back hard, and a sash whose balance lets go can drop on fingers. A sash can also be heavier than it looks. If a sash has fallen out of its track or is hanging by one side, close what you can, keep hands out from under it and leave it for a technician.
When new balances won’t be enough
Balances, cords and shoes are replaceable parts, and replacing them is usually far simpler than replacing the window. Replacement deserves a look when the jambs are warped so the sash binds no matter what balance is fitted, when the sash itself is rotted, or when the windows have other failing parts too; see double-hung windows. On an older wood window, rope and pulley repair is often paired with wood window repair.
Three things to look at first
- On a tilt-in window, make sure both tilt latches at the top of the lower sash are fully out and locked into the track.
- Vacuum dirt and paint flakes out of the side tracks.
- Note whether the sash drops from every height or only near the top or bottom.
Call or text (614) 333-6302 or book online.