All glass, no moving parts
A picture window does one job: it frames the view. It does not open, so there is no sash, no balance, no crank and no meeting rail, just a frame and a sealed glass unit. That gives it the largest clear glass of any window style and makes it the anchor of many living rooms, stairwells and great rooms.
What a fixed window does well
- Light and view. Narrow frames and an unbroken pane let in more daylight than an operable window the same size.
- Air sealing. With no operable joints, a properly installed picture window has no sash gaps for air to slip through.
- Size. Fixed units can be made larger than most operable sashes, because nothing has to lift or swing.
- Simplicity. Nothing to adjust, lubricate or wear out except the sealants and the glass unit itself.
The trade-off: no ventilation
A room with only fixed glass gets no fresh air from its windows. The usual answer is a combination unit: a picture window flanked by casements or double-hungs, or topped or bottomed by an awning window. You keep the view in the middle and the airflow at the edges. A fixed window is also never an escape opening, so a bedroom that relies on it still needs an operable window that meets the code; see our egress windows page.
Large glass and safety glazing
Big panes close to the floor are a hazard if someone falls into them. The Residential Code of Ohio treats a window pane as a hazardous location when all four of these are true: the pane is larger than 9 square feet, its bottom edge is less than 18 inches above the floor, its top edge is more than 36 inches above the floor, and a walking surface is within 36 inches of the glass. Glass in those spots has to be safety glazing, typically tempered. The code lists other hazardous locations too, such as glass near doors, stairs and bathtubs, so a contractor should check each opening rather than assume.
Choosing the glass for a picture window
Because a picture window is mostly glass, the glass package decides how it performs. Look at three numbers on the NFRC label:
- U-factor: how fast heat escapes. Lower is better in a Columbus winter.
- Solar heat gain coefficient (SHGC): how much of the sun’s heat comes through. A large west-facing pane can overheat a room on summer afternoons, so a lower SHGC helps there; on a south face, some winter sun can be welcome.
- Visible transmittance: how much light gets through. Higher means a brighter room, and some heavily coated glass looks slightly tinted.
Double-pane Low-E glass with argon fill is the usual starting point; triple-pane is available on many lines and adds weight, which matters on very large units. Our energy-efficient windows page explains the ENERGY STAR zones that apply across Central Ohio.
Installation details that matter
A large sealed glass unit is heavy. It has to sit on setting blocks in a frame that is level and well supported, so the weight does not rack the frame or stress the seal. Any bow or rot in the sill or header underneath should be repaired before the new unit goes in. On upper floors, think about how the outside glass will be cleaned, since a fixed pane cannot tilt in.
Already have a picture window?
If the frame is sound but the glass is cracked or fogged between the panes, the sealed glass unit can often be replaced on its own, without a new window. Our window glass replacement and foggy window repair pages cover that work. Either way, a technician looks at the window and the framing around it before anything is quoted, and you see the price before work starts. Call or text (614) 333-6302, or book online.